Tinned copper “C” lug for 75mm² earth cables

Product code: CE75 Category:
New
Tinned copper “C”
Clamp for branching by compression.
Tinned copper “C”
Clamp for branching by compression.

Tinned copper “C” lug for 75mm² earth cables

5,90 € w/o tax

147,50 € w/o tax for 25 pieces

Electrolytically tinned copper “C” lug for 75mm² earth wire.

In stock

Product code: CE75 Category:

The C-lug is used to make branches of the earth cable without breaking, and to connect earth cables of equal or unequal sections. Tinning provides better resistance to corrosion

  • Bare copper section 75mm²
  • Tinning 3-5µm
  • Dimensions A 30mm
  • Dimensions B 41mm
  • Dimensions C 26mm
  • Electrolytic copper material
  • Electrolytically tinned surface
  • Weight 0,1545 Kg/piece
  • Box of 25 units

 

Weight 0,1545 kg

You may also like…

Bimetallic plates (Cu-Al)

Bimetallic plate 14.5mm hole

0,75 € w/o tax
EDF 67-98-323 - 67-98-331 - 67-98-333

Semi-rigid medium-wall heat-shrinkable tubing, diameter before shrinking 9.5mm – after shrinking 3.6mm

8 € w/o tax
New
EARTHING BARS

50x5mm copper equipotentiality bar, 6 useful holes for M8 screws

38 € w/o tax
EDF 67-98-323 - 67-98-331 - 67-98-333

Semi-rigid medium-wall heat-shrink tubing, diameter before shrinkage 35mm – after shrinkage 12mm

35 € w/o tax
THICK WALL HEAT SHRINK TUBING – HALOGEN FREE

Medium-wall heat-shrink tubing with adhesive diameter before shrinking 22mm – after shrinking 6mm

7,62 € w/o tax
Earth clamps

Single earth shoe for cables from 50 to 120mm², stainless steel screws

10,90 € w/o tax
copper conductors

Bare copper section 75mm² – Coil of 50m

17,10 € w/o tax